814-QTW Pamplona Arm
Quatre Wood Base


32.5	23.5	23	25	INCH
83	60	58	64	CM

SKU: 814-QTW Pamplona Arm Categories: Arm, Chairs, Pamplona, Wood Chairs

Dimensions


32.5	23.5	23	25	INCH
83	60	58	64	CM

Upholstery

COM	2	Yards
COL	36	Sq. Ft.

Comments

This item requires textile approval prior to production. Click here to see a wide range of pre-approved textiles.

Textiles that have not been reviewed will require a memo sample. Memo samples can be ordered and sent to ISA directly from the manufacturer’s website. An Upholstery Approval Form must be filled out and submitted to ISA along with memo sample.

Specifications

Chair starts with a cold molded foam shell, which is made from a metal frame injected with PU foam.
Shell seat is then wrapped in ¼” high density CAL 117 FR foam.
Shell back and sides is wrapped in Dacron and upholstered as per specifications.
Available with the following bases:
Straight Metal Leg (SMLG) – Manufactured using Ø16mm steel tubing. Available in any standard ISA metal finishes.
Tapered Metal Legs (TMLG) – Manufactured using 16 gauge steel tube. Leg is Ø38 mm at the top tapering down to Ø16 mm. Available in any standard ISA metal finishes.
Tapered Wood Legs (TWLG) – Made of solid Ash. Leg is Ø38 mm at the top tapering down to Ø25 mm. Available in any standard ISA wood finish.
Beech Plywood Legs (PLGB) – High frequency molded with 30 layers, 1 1/8” thick. Legs taper from 2” at the top to 1 ¼” at the bottom. Profile is machined for an aesthetic V-shape. Available in any ISA standard wood finishes.
Desk Base (DKB) – Five prong base constructed from chromed cast aluminum with chrome capped dual wheel casters. Approximate Dims for DKB: H 31.5”-35” / D 27 / W 28