1180 Loft Bar

Specifications

• Barstool frame shall be constructed from solid kiln dried beech wood. Lumber to be dried to a final moisture content level between 6% – 8%.
• Front Legs to be constructed from single stock lumber. Finished dimension at the top of leg to be 1 5/8” x 1 5/8” tapering to 1¼” x 1¼” at bottom.
• Rear legs to be constructed from single stock lumber cut to shape. Finished dimensions are 1¼” x 1¼” and tapers top and bottom. The top of the chair back is integrally joined to the back legs.
• The seat shall be 5/8” thick plywood upholstered and applied to the solid beech wood frame. The seat is upholstered and attached and screwed to the beech wood frame.
• • Back is solid beech wood that is mortised and tenoned into the upper portion of the back legs and then upholstered.
• Side, front and back stretchers are mortised and tenoned into the legs for added strength.
• The barstool frame and seat frame are connected together by dowels, corner blocks, bolts and glue.
• All exposed natural woods are clear coated with polyurethane to a matte finish, all stains are penetrating type with the following application procedure:
  1) first coat of penetrating stain;
  2) sealer added;
  3) sand all show wood;
  4) shade stain for consistency;
  5) clear coat matte polyurethane added;
  6) light sanding;
  7) final clear coat.
• Floor contact points are nylon nail in type glides. Note: mechanically secured glides have a tenancy to mark flooring when the screw head gets exposed by wear.
• Also available as counter stool at 24” seat height.
  Print Specifications