361 Deco

Specifications

• Chairs and barstool frames shall be constructed from solid kiln dried beech-wood. Lumber to be dried to a final moisture content level between 6% – 8%.
• The frames shall be connected together by dowels, corner blocks, screws and glue.
• Glue and dowels shall connect the curved side stretchers from the front legs to back legs.
• Wood Legs (WLG) – Frame to have a metal stretcher between all legs (1 ¼” H x 3/16” thick) finished in Polished Chrome (P77). The stretcher is attached to the inside of the legs via screws. Legs available in any standard ISA wood finish.
• Wood Swivel Base (WSB) – Frame to be constructed from solid maple. Lumber to be dried to a final moisture content level between 6% – 8%. Legs to be constructed from single stock lumber. Finished dimension at the top of leg to be 2 ½” x 1 1 ¼” tapering to 1 ¼” x 1 ¼” at bottom. Available in any standard ISA wood finish.
• The seat shall be of webbed construction. Foam shall be high-density CAL 117 FR. Upholstery is applied as specified.
• All exposed wood can be finished in any standard ISA wood finish. Frames shall receive a clear urethane top coat in low gloss for added protection.
• Back and seat upholstery shall be stapled to the frame. Seats are foam with dacron fill and all seats are tight upholstery style.
• Barstool is also available in Counter height (24” seat height)