![]() |
![]() |
![]() |
|
|---|---|---|---|
| 31 | 23.5 | 23 | INCH |
| 79 | 60 | 58 | CM |
• Frames are constructed of solid beech. Lumber is dried to a final moisture content level between 6% – 8%.
• Front legs are constructed from single stock lumber. Finished dimension at the top of leg to be 2” x 1 3/4” tapering to 1” x 1” at bottom.
• Rear legs to be constructed from single stock lumber cut to shape. Finished dimensions are 2” x 1 3/4”,tapering to 1” x 1” at bottom.
• Seat rails are made from single stock lumber 2” x 2¼” and shaped to conform to the chair design with mortise & tenon connection & glued and screwed together with corner blocks.
• The seat is built of ½” thick solid core ply, with webbing in center, and applied to the solid beech hardwood frame. The seat is attached and screwed to the hardwood frame. Seat thickness with foam is 3”.
• The curved back is made of single piece formed plywood screwed into the seat frame. Back thickness with foam (UB) is 2”.
• Wood stretchers are added via mortise and tenon for added stability. Chair features 2 side stretchers; Stools feature 4 stretchers. Stool front stretcher received footrest, for protection.
• Metal footrest is added on to the front footrest of the stool, finished in Black, Brass or Brushed Aluminum. 2.5” high density CAL 117 FR foam and Dacron wrap is applied to the seat, 1.5” thick foam on the inside back and ¼” thick foam on the outside back.
• Stool version available in 24” seat height (counter), upon request.
P39 White Lacquered
P66 Wash
P01 Natural
P43 Agave
P41 Autumn
P45 Hazelnut
P35 Dark Walnut
P47 Bordeaux
P99 Coffee Bean
P63 Amber Cherry
P44 Dark Cherry
P52 Light Mahogany
P23 Dark Mahogany
P104 Wenge
P81 Taupe
P83 Slate
P85 Stone
P28 Black Aniline
P38 Black Lacquered
Finishes presented on screen may vary and are close representations only. Contact us here to request for finish samples.
Comments
Stack:3