 |
 |
 |
|
|---|---|---|---|
| 31 | 21 | 21.5 | INCH |
| 79 | 53 | 55 | CM |
451-WS/UBP Amalfi Arm
Wood Seat | Upholstered Back Pad
Dimensions
 |
 |
 |
|
|---|---|---|---|
| 31 | 21 | 21.5 | INCH |
| 79 | 53 | 55 | CM |
Upholstery
| COM | 0.5(2) | Yards |
| COL | 9(2) | Sq. Ft. |
Specifications
• Chair frames are constructed of solid kiln dried ash wood. Lumber to be dried to a final moisture content level between 6% – 8%.
• The frames are connected together by dowels, corner blocks, screws and glue.
• Legs are1.5” diameter at the top, tapering down to 1” diameter at the bottom.
• The seat consists of ½” thick plywood and is attached to the main frame via screws and glue.
• The back rest consists of ½” thick bent plywood and is attached to the main frame via screws and glue.
• The seat and back pad (when applicable) are approximately ½” thick and consist of pliable wood board, covered in high-density foam, meeting CAL 117 FR. Upholstery is then applied as specified.
• All exposed wood can be finished in any standard ISA wood finish. Frames then receive a clear urethane top coat in low gloss for added protection.
• All chairs include nail-in nylon glides suitable for most flooring types.
Finishes
P39 White Lacquered
P66 Wash
P01 Natural
P43 Agave
P41 Autumn
P45 Hazelnut
P35 Dark Walnut
P47 Bordeaux
P99 Coffee Bean
P63 Amber Cherry
P44 Dark Cherry
P52 Light Mahogany
P23 Dark Mahogany
P104 Wenge
P81 Taupe
P83 Slate
P85 Stone
P28 Black Aniline
P38 Black Lacquered
Finishes presented on screen may vary and are close representations only. Contact us here to request for finish samples.
Full Collection
-
31 21 21.5 INCH 79 53 55 CM -
31 21 21.5 INCH 79 53 55 CM -
31 21 21.5 INCH 79 53 55 CM