375 Marquis Stack

Specifications

• Chair and Stool frame shall be constructed from (European select) solid kiln dried beech. Lumber to be dried to a final moisture content between 6% – 8%.
• Front legs to be constructed from single stock lumber. Finished dimension at the top of leg to be 1¾” x 1¾” tapering to 1” x 1¼” at bottom.
• Rear legs to be constructed from compounded curved single stock lumber. Finished dimensions are 1¼” x 1¾” at the top of the leg, tapering to 1” x 1 ½” at bottom.
• Front and side seat rails are to be not less than 2 ¼” x 1 ¾” finished dimension. Both side and front rails attach to the front legs by mortise and tenon.
• Side, front and back stretchers ¾” x 1” connect all four legs. Stool features a metal protective footrest on front stretcher, available in Black, Brass or Satin Aluminum finishes.
• The seat panel is to be produced from 3/8” plywood and exhibit three lips (two sides and one front). The panel is to be covered in high density CAL 117 foam and upholstery as specified.
• All exposed wood to be finished in any standard ISA wood finish, and to receive a semi-gloss urethane clear coat for added protection.
• Includes nail-in nylon glides on all models.
• Stools are also available as a Counter Stool (24” seat height).
  Print Specifications