1473-WS Ola Bar
Wood Seat

Specifications

• Stool frames are constructed of solid kiln dried beech wood. Lumber to be dried to a final moisture content level between 6% – 8%.
• The frame components are connected together by dowels, corner blocks, screws and glue.
• Legs are 1.5” diameter at the top, tapering down to 1” diameter at the bottom.
• The seat rail is 2.5” H. The wood seat panel is ¼” thick plywood and is attached to the main frame via screws and glue.
• The back rest consists of ½” thick bent plywood and is attached to the main frame via dowels and glue.
• The seat pad (USP version) is approximately ½” thick and consist of pliable wood board, covered in highdensity foam, meeting CAL 117 FR. Upholstery is then applied, as specified.
• All exposed wood can be finished in any standard ISA wood finish. Frames then receive a clear urethane top coat in low gloss for added protection.
• All chairs include nail-in nylon glides suitable for most flooring types.
• Also Available in 24” seat height (counter height).