490-84 Essex Stack

Specifications

• Frame to be constructed from solid kiln dried beechwood. Lumber to be dried to a final moisture content level between 6% – 8%.
• Front Legs to be constructed from single stock lumber. Finished dimension at the top of leg to be 1¾” x 1¾” tapering to 1” x 1” at bottom.
• Rear legs to be constructed from single stock lumber cut to shape. Finished dimensions are 1½” x 1½” and tapers at the bottom 1”x 1¼”.
• Front and rear legs and attached by a solid beech frame that is 2½” x 1¾”.
• Side stretchers run front to back leg and are dowelled and glued together.
• The chair frame and seat frame are connected together by dowels, corner blocks, bolts and glue.
• The seat shall be ½” thick solid core ply and applied to the solid beech frame. The seat is attached to the beech frame via screws. Foam and upholstery are applied after assembly.
• Plywood back is curved ½” thick beech that is glued & doweled to the back upright.
  Print Specifications